Control method of Intelligent Bubble Lamp in Smart Home

The use of smart light has the following three control modes:

1, intelligent mobile device APP control use

2, only remote control use

3, intelligent housekeeper + remote control need to download APP assistance to use.

First, the use method of APP control of intelligent mobile devices.

1. Download the relevant APP with the smart mobile device, log in to APP, enter the account number and password of the smart butler, or click "scan" to directly scan the QR code behind the smart butler. Or click the local connection directly.

2. turn on the power supply and the router, and after the power supply and the network are connected, the intelligent butler light will change from red to blue or green.

3. Press the allow access key (the big circle key in the middle of the gateway), and the indicator light flashes alternately in color.

4. Wait for a while, and the intelligent butler will automatically add all kinds of lighting products after being electrified.

5. Click to add new devices in APP, and the green light of the intelligent housekeeper indicates that the lamps and lanterns and other devices have been netted successfully, and the newly added devices will be displayed on the APP.

6, withdraw from the network operation, delete the lamp from the remote control or intelligent butler, and there is a reset key on the back of the intelligent butler. After clicking, the initial setting of the intelligent butler will be restored, and all the devices that joined the intelligent butler will exit; or operate in APP.

Second, only use the remote control to control the use method.

When using the remote control for the first time, you need to code the relevant products for control, as follows:

Add lamps and lanterns to a group of remote controls.

Place the remote control close to the product antenna (Note 1) 10CM, press and hold the group open button for a long time (figure 2 gray), wait for the remote control indicator light to flash 3 times, the lamp flash 3 times, the remote control indicator light flash 5 times, and the lamp flash 2 times, indicating that the group is successful.

Remove the fixture from the current group:
Press the remote control close to the 10CM of the product antenna (Note 1), press the group button (gray in figure 2) for 5 times in a row, wait for the light to flash 2 times, and the current color of the lamp flashes 3 times, indicating that it has been deleted successfully from the current group.

Remove the fixture from the remote control:
Put the remote controller close to the product antenna (see Note 1) 10CM, according to figure 3 this order of operation: 1 off, 2 on, 3 off, 4 on, 5 right button, waiting for the indicator light to flash twice, after 3 seconds, the current color of the lamp flashes white 3 times, indicating that the related products have been reset successfully and quit the remote control.

Third, intelligent butler + remote control use method (need to download APP to help use)

Add the remote control to the smart butler first, and before you join the smart butler, make sure:

1. All devices that code with the remote control have been deleted (use page 10 to delete the light).

2. The remote control has exited any other intelligent butler (use this page to delete-the remote control has exited the intelligent butler).

Add the remote control to the intelligent butler:

When the intelligent butler allows the equipment to enter the network, press the full key of the remote control 5 times, and the indicator light flashes 2 times. After 3 seconds, the indicator light flashes 10 times in the process of entering the network, indicating that the network is successful; turn on APP and create a new one in the "grouping mode" option at the bottom. The first new area is associated with the first group of remote controls, and so on. The first four groups of APP are associated with the four remote control groups by default (adding lights, adding groups, deleting groups and deleting lights are all done in APP).

The remote control exits the smart butler:
According to figure 4, the operation is combined in this order: 1 on, 2 off, 3 on, 4 off, 5 left button, waiting for the indicator light to flash twice, and after 3 seconds, the indicator flashes 5 times, indicating that the remote control has been reset successfully and quit the intelligent housekeeper.